How Roofing Contractors Remove Your Old Roof

Every shingle roof ultimately needs to be replaced, whether it’s due to extreme weather, a natural calamity, or simply aging. A new roof installation is a big project with several steps. To get the best outcomes, each step of the process must be carried out correctly.

The tear-off is the first step in the roof replacement process after the supplies have been ordered. You can better understand what’s happening and get ready for the rest of the roof replacement process by taking the time to learn about the processes your roofing contractor uses to remove your old roof.

1. Protecting Your Yard By Getting It Ready

A roofing contractor is required to take all essential precautions to safeguard your home whenever they are working on your roof. Your contractor will enclose the vegetation and landscaping around your house to safeguard it.

This is done to make sure that all of the nails, shingles, and other debris that fall off your roof land on the tarp or the dumpster rather than your landscaping or yard. Over the doors, windows, and air conditioner, you might put plywood, especially close to where they’ll be throwing the material from the roof.

Old shingles and other waste will be collected by your contractor placing a dumpster trailer nearby.

2 Establishing Safety Protocols

Any trustworthy roofer takes pride in upholding OSHA safety rules to prevent accidents and property damage. Potential safety concerns will be noted by the contractor, who will also determine whether or not the workers can be supported structurally by the roof.

The contractor will do the following to guarantee the crews’ safety:

● Apply stability and safety measures when using ladders.

● Make sure the workforce is dressed appropriately.

● Install fall protection.

The safety precautions could alter as the condition of the roof, the weather, and other factors vary.

3. Taking the shingles off the roof.

The roofer will begin pulling off the old roof once the area has been prepared. Shovels with notches and garden forks will be used for this. While the forks effortlessly take the shingles from the roof decking, the shovels simply pull out nails.

At the roof peak, the crews will begin the removal process. As they progress down the roof, they will take off the ridge caps and peel off the shingles using a shovel or fork.

The old flashing and underlayment will then be taken off, leaving only the base wood. One team is pulling up the shingles while another is collecting trash from the yard and throwing it in the dumpster.

4. Handling the Old Nails on Your Roof

The team walks back over the roof to make sure all the nails are gone after removing the shingles and other components. This will guarantee that they are out of the way when your new roof is installed.

Another approach to check the roof deck’s structural soundness is to pull the nails out.

Before beginning to install the new underlayment, the crew ensures the roof deck is free of any debris. To make sure that any projecting nails missed earlier are removed, one final visual inspection is carried out.

5 Observing the Roof Deck

Your contractor will examine the decking for damage once your roof is free of debris and bare. Your decking must be in good condition since roofing materials require a sturdy foundation. It’s possible that the roof deck has also been harmed if your roof has to be replaced as a result of leaks, fallen objects, or extreme weather.

The most frequent issues are rotting regions and broken boards. Your contractor will replace any broken pieces and look out for any loose areas. While one or two boards almost always need to be changed, if the decking is severely weakened or rotting, it must be completely replaced.

6. Keeping the Yard Clean

After the old roof is taken off, there will be leftover debris, shingle granules, and nails in the yard. Before the installation is finished, your roofing contractor will make sure the roof and yard are thoroughly cleaned. The yard is constantly patrolled for stray nails with a magnetic instrument.

The installation of new materials frequently begins as the yard is being cleared of trash.

How Much Time Does It Take to Remove an Old Roof?

A roofing contractor often needs a few hours to remove the old roof. However, this is dependent on a number of variables, including the crew size, the size and complexity of the roof, and the weather.

Expect the project’s scope to vary if the roof decking has to be removed due to substantial damage.

Turn to the skilled, nearby roofing professionals at Roof Solar in Jacksonville, Florida, to guarantee complete satisfaction with your roof replacement project. We’ll provide you and your family with excellent peace of mind with our high caliber work and integrity. Call us right now to arrange a free roof assessment.